Intellicom Quick-Link High Speed Buffer 128K

$39.95


 Ready To Ship

    Limited quantity 1 left

Condition: Used Very Good

Category: Computer Parts and Accessories

Intellicom Quick-Link High Speed Buffer 128K ( Vintage )

A NEW GENERATION OF PRINTER BUFFERS
The Quick-Link is a completely self contained miniaturized printer buffer that fits behind the printer without any unsightly or space wasting boxes. The Quick-Link printer buffer virtually eliminates the wait normally experienced while the computer is busy sending data to the printer. A Quick-Link can also reduce the time the printer has to wait for the computer cutting the actual printing time. The net result can be an amazing increase in overall system efficiency. The Quick-Link installs in seconds and in most cases requires no configuration. Available in I6K or 64K of buffering.

PARALLEL TO SERIAL:
The Quick-Link BPS-1 6 /BPS-64 allows a parallel output port to communicate to any RS-232 device. The Quick-Link BPS-16/BPS-64, when used back to back with a BSP-16/BSP-64 provides a way to separate a parallel printer, hundreds of feet from the computer.

INPUT:
8 bit parallel. Centronics/Epson 36 pin male connector. Strobe/Busy Acknowledge handshake.

OUTPUT:
Serial. EIA RS232C, Female DB25 connector. BAUD RATE: 300-38,400. PARITY: Odd, even and none. WORD SIZE: 7 or 8 data bits. SOFTWARE HANDSHAKE: XON/XOFF. HARDWARE HANDSHAKE: jumper selectable on lines 20, 19. I 1, 6 & 8. 5 and 4. Lines 2 8. 3 swap jumpers.

PARALLEL TO PARALLEL:
The Quick-Link BPP-64 is the smallest inline parallel printer buffer available, just plug the Quick-Link into the parallel connector on the printer and attach the cable. All the advantages of printer buffering without the clutter.
INPUT: 8 bit parallel, Centronics/EPSON, 36 pin female connector. Strobe/busy handshake.

OUTPUT:
8 bit parallel, Centronics/EPSON, 36 pin male connector. Strobe/busy Acknowledge, handshake

64 K High Speed Buffer
SERIAL TO PARALLEL:
The Quick-Link BSP-16/BSP-64 instantly transforms the parallel connector of your printer into an RS232 serial port. Simply plug the Quick-Link directly into the parallel connector of your printer. No printer disassembly is required.
INPUT:
Serial, EIA RS232C. Female DB25 connector. BAUD RATE: 300-38,400. PARITY: Odd. even and none. WORD SIZE: 7 or 8 data bits. HANDSHAKE: XON/XOFF or ETX/ACK software handshake, jumper selectable hardware handshake on lines 20. 19, I 1, 6 & 8, 5 and 4. Line 2 & 3 swap jumpers. Switch selectable printer error line monitoring to assert a handshake in the event of a printer error (offline, paper out or head jam). OUTPUT: 8 bit parallel, Centronics/Epson. 36 pin male connector, Strobe/Busy handshak

Write Your Review